History available for VIN 1HGCP26839A081814
- Make:Honda
- Model:Accord
- Year:2009
- Engine:2.4L L4 DOHC 16V
- Bodytype:Sedan 4-dr
| We found history records for Honda Accord, 1HGCP26839A081814. Additional information about history report below: | |
 |
Technical data |
|
Equipment |
|
History records |
|
Mileage, odometer records, odometer checks |
|
Checks for collision, junk, salvage, total-loss |
|
Checks for theft, fire, flood, hail |
|
Checks for taxi or police use |
|
Checks for more than 60 issues read more |
|
Photos (10) |
|
Recalls (24) read more |
Sample report
Check this vehicle
Save 44% 
Why should I check vehicle history?
There are over 3.5 million vehicles deemed total-losses each year in the United States. Because of that it is very important to check vehicle history before buying a used car. Solidvin.com report checks for more than 60 issues: salvage titles, collision, total-loss, fire, flood, hail, odometer rollbacks etc.
- Solidvin 
Don't hesitate to check vehicle history. Because every piece of information is important and valuable. Our reports help You to make better decisions.
- Solidvin
Run Your VIN check on database which contains over 40 million salvage or total loss records and data providers include over 9000 insurance carriers, auto recyclers, junk yards and salvage yards.
- Solidvin
Recalls: Honda Accord, 2009
Date: 04.08.2011Component: Power Train : Automatic Transmission : Control Module (tcm, Pcm)Manufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.Consequencs: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.Notes: Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 04.08.2011Component: Power Train : Automatic Transmission : Control Module (tcm, Pcm)Manufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.Consequencs: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.Notes: Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 04.08.2011Component: Power Train : Automatic Transmission : Control Module (tcm, Pcm)Manufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.Consequencs: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.Notes: Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 04.08.2011Component: Power Train : Automatic Transmission : Control Module (tcm, Pcm)Manufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.Consequencs: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.Notes: Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 04.08.2011Component: Power Train : Automatic Transmission : Control Module (tcm, Pcm)Manufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.Consequencs: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.Notes: Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 04.08.2011Component: Power Train : Automatic Transmission : Control Module (tcm, Pcm)Manufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.Consequencs: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.Notes: Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 11.02.2010Component: Air BagsManufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2001-2002 honda accord and civic, model year 2002 cr-v and odyssey, model year 2002-2003 3.2tl and one vehicle for model year 2003 honda pilot, civic and acura 3.2cl passenger vehicles. the driver's airbag inflator could produce excessive internal pressure. if an affected airbag deploys, the increased internal pressure may cause the inflator to rupture.Consequencs: Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants. Notes: Dealers will replace the airbag inflator free of charge. the safety recall began on february 26, 2010. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 11.02.2010Component: Air BagsManufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2001-2002 honda accord and civic, model year 2002 cr-v and odyssey, model year 2002-2003 3.2tl and one vehicle for model year 2003 honda pilot, civic and acura 3.2cl passenger vehicles. the driver's airbag inflator could produce excessive internal pressure. if an affected airbag deploys, the increased internal pressure may cause the inflator to rupture.Consequencs: Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants. Notes: Dealers will replace the airbag inflator free of charge. the safety recall began on february 26, 2010. owners may contact honda automobile customer service at 1-800-999-1009.
Date: 18.11.2009Component: EquipmentManufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling aftermarket full nose masks, part number 08p35-ta0-100 and 08p35-ta6-100 manufactured between august 9, 2007 through december 11, 2007. the accessory was designed specifically for model year 2008-2010 honda accord 4-door vehicles. it is possible for the nose mask material to interfere with part of the hood latch. if the hood has not been completely closed and the nose mask interferes with the secondary hood latch mechanism the hood may pop open while the vehicle being driven. Consequencs: This may result in reduced driver visibility that could increase the risk of a crash.Notes: Honda is asking owners to please remove the nose mask immediately and call any authorized honda dealer to make an appointment to return the nose mask and have it replaced free of charge. the safety recall began on march 2009. owners may contact honda customer service at 1-800-999-1009.
Date: 18.11.2009Component: EquipmentManufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling aftermarket full nose masks, part number 08p35-ta0-100 and 08p35-ta6-100 manufactured between august 9, 2007 through december 11, 2007. the accessory was designed specifically for model year 2008-2010 honda accord 4-door vehicles. it is possible for the nose mask material to interfere with part of the hood latch. if the hood has not been completely closed and the nose mask interferes with the secondary hood latch mechanism the hood may pop open while the vehicle being driven. Consequencs: This may result in reduced driver visibility that could increase the risk of a crash.Notes: Honda is asking owners to please remove the nose mask immediately and call any authorized honda dealer to make an appointment to return the nose mask and have it replaced free of charge. the safety recall began on march 2009. owners may contact honda customer service at 1-800-999-1009.
Date: 18.11.2009Component: EquipmentManufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling aftermarket full nose masks, part number 08p35-ta0-100 and 08p35-ta6-100 manufactured between august 9, 2007 through december 11, 2007. the accessory was designed specifically for model year 2008-2010 honda accord 4-door vehicles. it is possible for the nose mask material to interfere with part of the hood latch. if the hood has not been completely closed and the nose mask interferes with the secondary hood latch mechanism the hood may pop open while the vehicle being driven. Consequencs: This may result in reduced driver visibility that could increase the risk of a crash.Notes: Honda is asking owners to please remove the nose mask immediately and call any authorized honda dealer to make an appointment to return the nose mask and have it replaced free of charge. the safety recall began on march 2009. owners may contact honda customer service at 1-800-999-1009.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009Component: Exterior LightingManufacturer: SabersportDescription: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.Consequencs: Decreased lighting visibility may result in a vehicle crash.Notes: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 06.01.2011Component: Electrical SystemManufacturer: Honda (american Honda Motor Co.)Description: Honda is recalling certain model year 2010 honda accord and cr-v vehicles. there is a potential failure with the engine wiring harness connector which may cause intermittent spark firing or the engine to stall.Consequencs: An engine stall will increase the risk of a crash.Notes: Dealer will inspect and replace the ignition wiring harness connector free of charge. the safety recall is expected to begin on or before january 24, 2011. owners may contact honda at 1-800-999-1009.