History available for VIN 5NMSH73E87H034232

  • Make:
    Hyundai
  • Model:
    Santa Fe Limited AWD
  • Year:
    2007
  • Engine:
    3.3L V6 DOHC 24V
  • Bodytype:
    Sport Utility 4-dr
We found history records for Hyundai Santa Fe Limited AWD, 5NMSH73E87H034232. Additional information about history report below:
available Technical data
available Equipment
available History records
available Odometer, mileage checks
available Checks for collision, junk, salvage, total-loss
available Checks for theft, fire, flood, hail
available Checks for taxi or police use
available Checks for more than 60 issues read more
available Recalls (22) read more

Sample report

Sample report

1 report

$8.90

  • Check this vehicle
Buy report
Save 44%

4 reports

$19.90

  • Check this vehicle + 3 others
Buy reports

Already have package?

  • Use the secret code
Insert code

Why should I check vehicle history?

Recalls: Hyundai Santa Fe, 2007

Date: 03.09.2008Component: Trailer HitchesManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling 3,387 trailer hitch wiring harnesses either included with a trailer hitch or sold as a service part manufactured by thule towing systems and distributed by hyundai for installation on my 2007-2008 santa fe and veracruz vehicles. the accessory trailer hitch wiring harness converter module is mounted to the top surface of the rear bumper reinforcement. some circuit board components may not have been thoroughly sealed to prevent moisture contact. the moisture may result in circuit board corrosion possibly causing a short circuit.Consequencs: A short circuit can cause overheating and damage to the converter module, possibly resulting in a fire.Notes: This recall supersedes a previous recall conducted by hyundai affecting the same trailer hitch wiring components concerning high current leakage or a short circuit of capacitor c1. (please see 08e016). owners who have already had their trailer hitch repaired under the initial campaign will receive a second notice from hyundai to have the newly designed harness installed. hyundai will notify all owners and will repair the affected harnesses free of charge. the recall began on october 13, 2008. owners may contact hyundai customer assistant center at 1-800-633-5151.
Date: 03.09.2008Component: Trailer HitchesManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling 3,387 trailer hitch wiring harnesses either included with a trailer hitch or sold as a service part manufactured by thule towing systems and distributed by hyundai for installation on my 2007-2008 santa fe and veracruz vehicles. the accessory trailer hitch wiring harness converter module is mounted to the top surface of the rear bumper reinforcement. some circuit board components may not have been thoroughly sealed to prevent moisture contact. the moisture may result in circuit board corrosion possibly causing a short circuit.Consequencs: A short circuit can cause overheating and damage to the converter module, possibly resulting in a fire.Notes: This recall supersedes a previous recall conducted by hyundai affecting the same trailer hitch wiring components concerning high current leakage or a short circuit of capacitor c1. (please see 08e016). owners who have already had their trailer hitch repaired under the initial campaign will receive a second notice from hyundai to have the newly designed harness installed. hyundai will notify all owners and will repair the affected harnesses free of charge. the recall began on october 13, 2008. owners may contact hyundai customer assistant center at 1-800-633-5151.
Date: 15.04.2009Component: Service Brakes, Hydraulic : Switches : Brake LightManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling 532,633 my 2006-2007 accent, entourage, sonata, my 2007 azera, elantra and santa fe, my 2005-2007 tucson and my 2007-2008 veracruz vehicles. the stop lamp switch in the affected vehicles may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause the brake lights to remain illuminated when the brake pedal is released. a stop lamp switch malfunction may also affect the operation of the brake-transmission shift interlock feature so the transmission shifter would not be able to be shifted out of the park position. it may also cause the electronic stability control (esc) malfunction light to illuminate, and it may not deactivate the cruise control when the brake pedal is depressed.Consequencs: Any of these malfunctions, alone or in combination, may lead to a crash.Notes: Dealers will replace the stop lamp switch free of charge. the recall began on june 29, 2009. owners may contact the hyundai customer assistance center at 1-800-633-5151.
Date: 09.09.2011Component: Air Bags : FrontalManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling certain model year 2007-2008 hyundai veracruz vehicles manufactured from december 26, 2006, through march 21, 2008, and model year 2007-2008 hyundai santa fe vehicles manufactured from april 19, 2006 through march 20, 2008. the clock spring contact assembly for the driver's air bag supplemental restraint system (srs) may become damaged through usage over time. the driver's air bag electrical circuit will experience a high resistance condition, potentially causing the driver's air bag to not deploy.Consequencs: If the clock spring develops high resistance, in the event of a crash, the drivers air bag will not deploy and will not be able to properly protect the driver, increasing the risk of injuries.Notes: Hyundai dealers will replace the vehicle's driver's air bag clock spring contact assembly free of charge. the safety recall began in november 2011. owners may contact hyundai customer connect center at 1-800-633-5151.
Date: 09.09.2011Component: Air Bags : FrontalManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling certain model year 2007-2008 hyundai veracruz vehicles manufactured from december 26, 2006, through march 21, 2008, and model year 2007-2008 hyundai santa fe vehicles manufactured from april 19, 2006 through march 20, 2008. the clock spring contact assembly for the driver's air bag supplemental restraint system (srs) may become damaged through usage over time. the driver's air bag electrical circuit will experience a high resistance condition, potentially causing the driver's air bag to not deploy.Consequencs: If the clock spring develops high resistance, in the event of a crash, the drivers air bag will not deploy and will not be able to properly protect the driver, increasing the risk of injuries.Notes: Hyundai dealers will replace the vehicle's driver's air bag clock spring contact assembly free of charge. the safety recall began in november 2011. owners may contact hyundai customer connect center at 1-800-633-5151.
Date: 19.06.2008Component: Equipment : Other : LabelsManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling 88,943 my 2007-2008 hyundai santa fe vehicles equipped with p235/60r18 tires. these vehicles fail to comply with the labeling requirements of federal motor vehicle safety standard no. 110 "tire selection and rims for motor vehicles." the black certification label affixed to the driver's side center pillar, incorrectly lists the gross axle weight ratings (gawr).Consequencs: Overloading your vehicle may adversely affect handling and braking and may cause tire damage, resulting in tire failure and a crash without warning.Notes: Hyundai will mail corrected certification labels along with the instructions to the affected owners. the customer will have the option for dealers to install the label free of charge. the recall began on august 5, 2008. owners may contact hyundai at 1-800-633-5151.
Date: 19.06.2008Component: Equipment : Other : LabelsManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling 88,943 my 2007-2008 hyundai santa fe vehicles equipped with p235/60r18 tires. these vehicles fail to comply with the labeling requirements of federal motor vehicle safety standard no. 110 "tire selection and rims for motor vehicles." the black certification label affixed to the driver's side center pillar, incorrectly lists the gross axle weight ratings (gawr).Consequencs: Overloading your vehicle may adversely affect handling and braking and may cause tire damage, resulting in tire failure and a crash without warning.Notes: Hyundai will mail corrected certification labels along with the instructions to the affected owners. the customer will have the option for dealers to install the label free of charge. the recall began on august 5, 2008. owners may contact hyundai at 1-800-633-5151.
Date: 25.07.2012Component: Air Bags : Frontal : Sensor/control ModuleManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling certain model year 2007 through 2009 santa fe vehicles manufactured from april 19, 2006, through july 7, 2008. the occupant classification system (ocs) may need recalibration to accurately detect small statured adults.Consequencs: Improper classification or detection may cause the front passenger airbag not to deploy in the event of a crash, increasing the risk of injury to the front passenger.Notes: Hyundai will notify owners, and dealers will update the classification software free of charge. the safety recall began on september 7, 2012. owners may contact hyundai at 1-800-633-5151.
Date: 25.07.2012Component: Air Bags : Frontal : Sensor/control ModuleManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling certain model year 2007 through 2009 santa fe vehicles manufactured from april 19, 2006, through july 7, 2008. the occupant classification system (ocs) may need recalibration to accurately detect small statured adults.Consequencs: Improper classification or detection may cause the front passenger airbag not to deploy in the event of a crash, increasing the risk of injury to the front passenger.Notes: Hyundai will notify owners, and dealers will update the classification software free of charge. the safety recall began on september 7, 2012. owners may contact hyundai at 1-800-633-5151.
Date: 25.07.2012Component: Air Bags : Frontal : Sensor/control ModuleManufacturer: Hyundai Motor CompanyDescription: Hyundai is recalling certain model year 2007 through 2009 santa fe vehicles manufactured from april 19, 2006, through july 7, 2008. the occupant classification system (ocs) may need recalibration to accurately detect small statured adults.Consequencs: Improper classification or detection may cause the front passenger airbag not to deploy in the event of a crash, increasing the risk of injury to the front passenger.Notes: Hyundai will notify owners, and dealers will update the classification software free of charge. the safety recall began on september 7, 2012. owners may contact hyundai at 1-800-633-5151.
Date: 07.02.2008Component: Trailer HitchesManufacturer: Hyundai Motor CompanyDescription: This recall has been superceded by recall 08e-055. hyundai is recalling 3,387 trailer hitch wiring harnesses either included with a trailer hitch or sold as a service part manufactured by thule towing systems and distributed by hyundai for installation on my 2007-2008 santa fe and veracruz vehicles. the accessory trailer hitch wiring harness converter module is mounted to the top surface of the rear bumper reinforcement. high current leakage or a short circuit of capacitor c1 could cause heat related damage to the wiring harness converter module.Consequencs: Excessive heat may cause damage to the rear bumper area and may potentially result in a fire.Notes: Hyundai will notify owners and will replace the trailer hitch wiring harness free of charge. the recall began on march 31, 2008. owners may contact hyundai at 1-800-633-5151.
Date: 07.02.2008Component: Trailer HitchesManufacturer: Hyundai Motor CompanyDescription: This recall has been superceded by recall 08e-055. hyundai is recalling 3,387 trailer hitch wiring harnesses either included with a trailer hitch or sold as a service part manufactured by thule towing systems and distributed by hyundai for installation on my 2007-2008 santa fe and veracruz vehicles. the accessory trailer hitch wiring harness converter module is mounted to the top surface of the rear bumper reinforcement. high current leakage or a short circuit of capacitor c1 could cause heat related damage to the wiring harness converter module.Consequencs: Excessive heat may cause damage to the rear bumper area and may potentially result in a fire.Notes: Hyundai will notify owners and will replace the trailer hitch wiring harness free of charge. the recall began on march 31, 2008. owners may contact hyundai at 1-800-633-5151.
Date: 01.04.2013Component: Service Brakes, Hydraulic : Switches : Brake LightManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Exterior Lighting : Brake Lights : SwitchManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Service Brakes, Hydraulic : Switches : Brake LightManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Exterior Lighting : Brake Lights : SwitchManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Service Brakes, Hydraulic : Switches : Brake LightManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Exterior Lighting : Brake Lights : SwitchManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Service Brakes, Hydraulic : Switches : Brake LightManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Exterior Lighting : Brake Lights : SwitchManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Service Brakes, Hydraulic : Switches : Brake LightManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Date: 01.04.2013Component: Exterior Lighting : Brake Lights : SwitchManufacturer: Hyundai Motor CompanyDescription: Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. in september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. the total number of vehicles being recalled is now 1,712,336. in the affected vehicles, the stop lamp switch may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.Consequencs: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash. Notes: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 22, 2013. owners may contact hyundai at 1-800-633-5151. hyundai's recall campaign number is 110.
Read more